Concrete drills for hammer drills: ranking of the TOP 10 best sets of 2022

Hammer drill - This special-purpose equipment that allows you to punch holes of different depths and different diameters.

Concrete drills differ in the material and shape of the cutting edge, the design of the shank, the number of gutters for removing debris and other parameters.

What features of hammer drills should you pay attention to when choosing which sets of equipment are the best today, we will consider in this review.

Page navigation:

Criteria for selecting concrete drills for a rotary hammer

The decisive factor when choosing equipment of this type is the material of the tip.

In this regard, the highest demands are placed on drilling products.

Keep in mind! When choosing a drill for concrete, consider the following:

Working part. Drills make it possible to make holes in brick, concrete and stone. Core bits are used for drilling deep cylindrical holes (for example, for electrical fittings). A chisel and chisel can be useful for breaking through concrete walls, dismantling plaster, and removing ceramic tiles.
Shank type. Depending on the design, there are shanks SDS, SDS-Plus, SDS-Max, SDS-Top, SDS-Quick. The SDS-Plus version is the most common, with a diameter of 10 mm and 4 grooves. Compatible with many models of modern hammer drills.
Processed materials. Depending on the model, in addition to concrete, hammer drills can handle brickwork, stone and other dense materials. When choosing, you should pay attention to the specialization of a particular set.
Storage. Many drill sets are equipped with a convenient case for storing and carrying equipment. In inexpensive models, this role is played by a plastic blister case.

Drilling Tips

There are several basic rules with which you can perform drilling as efficiently as possible:

If you do not have relevant practical experience in this matter, then stock up on different types of drills. Each type of tool is intended for a specific type of work: for brick - to process brick walls, for concrete - to create holes in structures made of this material, for ceramics - to process ceramic tiles, etc. But during work, the element also often rests against reinforcement made of metal, in this case you should change the tool to a more suitable one. Some craftsmen can sharpen a tool so that they can also be used to process metal. But in order to do this job, you will need a lot of experience and special knowledge.
Do not allow the drill to overheat. You need to take short breaks every fifteen to twenty seconds, cooling the instrument with water or a special liquid.
The structure of the concrete composition contains solid particles and stones, bumping into which the tool can stall. These elements should be crushed with a chipper and only then begin work.
If there is a need to make a hole in a ceiling or load-bearing wall made of concrete, it is recommended to use a hammer drill. It will be much more effective.
In order to process a ceramic floor or shelf covering, it is necessary to turn off the impact mode on the hammer drill or hammer, otherwise the tile may become deformed or crack.
Cheap drills designed for concrete processing need to be sharpened regularly. For this purpose, it is better to use a grinder with a diamond blade.

The best sets in terms of price and quality

The presented sets of concrete drills for rotary hammers are distinguished by their affordable cost, high-quality workmanship, and a variety of types of equipment.

BOSCH 2608578765

The SDS-plus BOSCH 2608578765 set, packed in a small case with soft holders, is a universal set of accessories for a rotary hammer.

The presented kit is designed for working with concrete and brick.

The set includes eleven elements with a shank for an SDS-Plus chuck.

The products are made of ultra-strong tungsten carbide alloy; they are distinguished by their high reliability, ease of use, and the possibility of rapid use.

The equipment is suitable for performing household and professional work.

Characteristics and equipment:

working part - pike, drill, chisel;
shank - SDS-plus with a diameter of 10 mm;
number of items in the set - 11;
processed materials - concrete, brick;
set of drills - 5×110/6×110/7×110/8×110/6×160/7×160/8×160/10×160/12×160 mm;
chisel - 20×250 mm;
peak - 250 mm;
Features: case for carrying and storage.

Advantages

reliability;
Ease of use;
versatility of use;
affordable price.

Flaws

no long drills;
not the most convenient case.

BOSCH 2608833910

Using the SDS-plus BOSCH 2608833910 set, made from high-quality materials, users have the opportunity to carry out drilling work on stone, concrete and brick.

The set contains five items with a diameter of 5 to 10 mm.

Ease of storage and carrying is provided by a convenient plastic case.

The products presented in the kit are optimal for carrying out construction or finishing work in domestic conditions.

The drills have a length from 110 to 160 mm.

They are distinguished by their resistance to the high loads that inevitably arise during impact drilling, and are even suitable for processing heavy-duty reinforced concrete.

The spiral shape of the elements helps to effectively remove dust and particles from the hole being drilled and promotes effective cooling of the drills during operation.

Characteristics and equipment:

working part - drill;
shank - SDS-plus with a diameter of 10 mm;
number of items in the set - 5;
processed materials - concrete, reinforced concrete, brick, stone;
set of drills - 5×110/6×110/6×160/8×160/10×160 mm;
Features: plastic case, centering tip.

Advantages

excellent quality of equipment;
Ease of use;
high reliability;
affordable price tag.

Flaws

the case is not of the best quality;
Only the main numbers are included.

Makita MakPac S (B-53877)

The SDS-plus Makita MakPac S (B-53877) set in a branded case from the manufacturer is made of high-quality steel and is suitable for universal use.

The presented equipment is suitable for gating, drilling, and cleaning surfaces from foreign objects.

The set contains 17 items - several chisels for removing mortar from the surface and other work, peaks for scoring, drills of various sizes for drilling holes of different diameters.

Each item is marked and designated according to its standard size.

Characteristics and equipment:

working part - pike, drill, chisel;
shank - SDS-plus with a diameter of 10 mm;
number of items in the set - 17;
processed materials - concrete, stone;
set of drills - 5×110 ×2/6×110 ×2/7×110 ×2/8×110 ×2/10×160/10×210/12×210/14×260 mm;
set of chisels - 20×140/20×250/40×250 mm;
peak set - 140/250 mm;
Features: storage case with additional compartment.

Advantages

convenient case;
drills of basic sizes;
high quality manufacturing of equipment;
decent equipment.

Flaws

high price;
the case gets dirty quickly;
unpleasant smell of plastic.

DeWALT Extreme 2 DT7935B-QZ

The SDS-plus DeWALT Extreme 2 DT7935B-QZ kit is an excellent solution for quickly drilling holes (including through holes) in brick, stone or concrete.

The set consists of ten items, which are housed in a plastic Tough Case.

These professional products do not overheat at the highest rotation speeds and have a long service life.

The unique design is highlighted by an optimized groove design for more efficient debris removal.

The tips have a high penetration value even with difficult-to-cut materials.

Characteristics and equipment:

working part - drill;
shank - SDS-plus with a diameter of 10 mm;
number of items in the set - 10;
processed materials - concrete, brick, stone;
set of drills - 5×110/6×110 ×2/6×160 ×2/7×160/8×160/9×160/10×160/12×160;
Features: plastic storage case.

Advantages

convenient and high-quality case;
high-quality equipment;
rich equipment;
high reliability.

Flaws

decent cost of the kit;
lack of long drills;
The cover gets dirty quickly.

Metabo Classic 626244000

With the SDS-plus Metabo Classic 626244000 set, users have the opportunity to drill holes of different diameters in concrete, brick and stone materials.

The equipment is designed to use the most popular SDS-plus shank.

The set includes 7 drills - 12, 10, 8, 6 and 5 mm of different lengths.

Each element has an individual seat, which is marked accordingly.

The packaging and at the same time a place for storing/carrying drills is a durable case with an information sticker and graphic images with safety recommendations.

Characteristics and equipment:

working part - drill;
shank - SDS-plus with a diameter of 10 mm;
number of items in the set - 7;
processed materials - concrete, brick, stone;
set of drills - 5×110/6×110/8×110/6×160/8×160/10×160/12×160 mm;
Features: case for storage and carrying.

Advantages

affordable price;
famous brand;
good sludge removal;
powerful soldering.

Flaws

the case cannot be called ergonomic;
no long drills included;
There are no large equipment numbers.

CALIBER NB-13

The SDS-plus format set CALIBER NB-13, equipped not only with drills, but also with a pick and a chisel, will be useful to owners of rotary hammers working with concrete, stone and brick.

The popular SDS-plus mount guarantees compatibility with most rotary hammer models.

All elements are made from high-quality tool steel alloy.

The equipment is designed for intensive use.

The means for storing and carrying the kit is a reliable case with compact dimensions. The accessory closes with two strong latches.

Characteristics and equipment:

working part - lance, drill, spatula, stroker, chisel;
shank - SDS-plus with a diameter of 10 mm;
number of items in the set - 13;
processed materials - concrete, brick, stone;
set of drills - 6×160/8×160/10×160/8×210/10×210/12×210/10×260/12×260/14×260 mm;
blade - 14×250×40 mm;
chisel - 14x250x20 mm;
peak - 14×250 mm;
strobe - 14×250 mm;
Features: case for storage and carrying.

Advantages

ergonomic case;
there is a wide chisel;
many different drills;
high quality workmanship.

Flaws

There are no thin drills included;
impressive price tag.

Types of drills

This product differs in design features. Based on the type of their shank, tools can be divided into 4 types. The most popular is the drill with the SDS-plus shank marking. Its diameter is 1 cm, its length is about 40 mm, and there are also 4 recesses for installation in the cartridge. And the diameter of the product itself can vary from 4 to 26 mm; they are used for household hammer drills. Drills with a diameter of more than 26 mm have a shank marked SDS-max. The diameter of such a shank is 18 mm and its length is 90 mm. They are used in high power tools. Drills marked SDS-top have a shank diameter of 14 mm and a length of 70 mm. they are used quite rarely. There is also an SDS-quick, which has keys and a holder.

This equipment also differs in the shape of the working part. The screw unit has a large angle of inclination of the groove, due to this it is possible to obtain a deep hole of various diameters. It has a spiral device, and during operation it creates high rotation, thanks to which dirt and dust are quickly removed, operating time is reduced, and the hammer drill does not receive a large load. If a hole of great depth is not required, then a tool with a small angle of inclination is used. When it is necessary to drill a large number of deep holes, a drill with a large angle of inclination of the grooves is used. They create a high drilling speed and remove dust perfectly. But this type creates a large load on the tool, so a powerful hammer drill is required to work with it.

In addition, you can classify the equipment by type of soldering. The classic option is carbide brazing, where the cutting edges are arranged in the form of a cross. There are also centering solders. They have a special geometric shape; during operation, the drill will not “leave” from the center.

Equipment is also divided by size. The total length can vary from 10 to 100 cm, the length of the product will depend on its diameter. And the outer diameter of the drill depends on the type of shank.

Best Inexpensive Drill Sets

Budget drills are presented with no less high-quality products, but, as a rule, in reduced configurations .

Makita D-00795

Using the SDS-plus Makita D-00795 kit, supplied in a convenient blister, you can quickly and easily make a hole of any diameter in concrete or masonry.

The presented set is equipped with five high-strength drills.

Each product is made of a special alloy and has an optimal centering tip geometry, guaranteeing accurate and fast drilling.

The convenient shank provides ease of installation, versatility and compatibility with many well-known hammer drills.

The dust removal spiral with four-groove thread ensures rapid removal of cuttings from the drilling zone. This technology speeds up and facilitates the work process.

Characteristics and equipment:

working part - drill;
shank - SDS-plus with a diameter of 10 mm;
number of items in the set - 5;
processed materials - concrete, brick;
set of drills - 5×110/6×110/8×110/6×160/8×160 mm;
Features: plastic blister packaging.

Advantages

reasonable price;
quality steel;
there is lubricant from the factory;
compactness for storage.

Flaws

primitive packaging;
limited selection of rooms;
lack of long equipment in the set.

Metabo 626243000 160 mm

The SDS-plus Metabo 626243000 set with 160 mm long accessories is suitable for use in rotary hammers when drilling materials such as brick or concrete.

The drill bits used in the kit are the most common with guaranteed compatibility with most models of rotary hammers from different manufacturers.

The set contains five items - these are drills with a diameter of 5 to 10 mm.

The elements are made of high-quality steel, contain a tip made of hard alloys, which easily passes through dense materials and withstands long-term use.

The spiral is made in the shape of the letter S for faster removal of generated debris during drilling.

Characteristics and equipment:

working part - drill;
shank - SDS-plus with a diameter of 10 mm;
number of items in the set - 5;
processed materials - concrete, stone;
set of drills - 5×160/6×160 ×2/8×160/10×160 mm;
Features: plastic case for storing equipment.

Advantages

ideal for domestic use;
affordable price tag;
high-quality equipment;
Convenient case included.

Flaws

no long drills;
The case gets dirty quickly.

ELITECH 1820.036600

The SDS-plus ELITECH 1820.036600 set is ideal for making holes in concrete materials using a hammer drill with the appropriate type of fastening.

The presented kit is equipped with elements with an SDS-Plus shank - the most popular equipment base option, compatible with most modern rotary hammers.

The plastic case contains five drills with a diameter of 5 to 10 mm and a length of 110 and 160 mm.

The equipment is distinguished by excellent workmanship and a high degree of reliability.

Characteristics and equipment:

working part - drill;
shank - SDS-plus with a diameter of 10 mm;
number of items in the set - 5;
processed materials - concrete;
set of drills - 5×110/6×110/6×160/8×160/10×160 mm;
Features: Plastic storage case.

Advantages

low price;
main numbers in the set;
there is a case for storing equipment;
Ease of use.

Flaws

The case cover is not very reliable;
there is a smell of plastic;
Medium length rigs only.

BOSCH 2608833912 160 mm

Using the SDS-plus BOSCH 2608833912 160 mm set, designed to work with concrete, brick or stone in hammer drilling mode, the user will be able to make clean and neat holes in dense materials.

Drills of the same length have diameters of 6, 8 and 10 mm.

The equipment is suitable for construction, finishing and installation work.

Suitable for use in household and professional hammer drill models.

Three complete products are placed in plastic packaging.

The SDS-Plus type shank guarantees reliable fixation in the power tool chuck.

The spiral-shaped working part of each drill effectively removes dust from the hole being made and does not heat up during operation.

Characteristics and equipment:

working part - drill;
shank - SDS-plus with a diameter of 10 mm;
number of items in the set - 3;
processed materials - concrete, brick, stone;
set of drills - 6×160/8×160/10×160 mm;
Features: plastic packaging, centering tip.

Advantages

ease of drilling even with a weak impact;
the most common drill diameters included;
high quality of materials and workmanship;
price corresponding to quality.

Flaws

no case included;
The packaging is poorly suited for storing equipment.

Drill design

The design of the drill is quite standard. It consists of standard components such as a shank, cutting elements and chip removal elements. Made from alloys of increased hardness, the tip resembles the letter T.

Such tips are used when working with hard materials (metals, concrete, marble). To avoid confusion, it is better to look at a photo of a concrete drill.

Some of the best concrete drills are Pobedit drills. Pobedit is a special alloy of tungsten and cobalt, but quite a long time ago this alloy ceased to be used due to its high cost and was replaced by cheaper and higher-quality analogues.

The pobedite drill is presented on the market in very large quantities, but the brand name of the drill itself is not indicated on the description, which means that you can select it yourself based on your experience or the knowledge of the seller.

If you see drills with strange Chinese symbols, it is better to avoid this purchase, since they will only last for a couple of minutes of work (at best).

There is one tradition, the essence of which is to wet the tip of the drill (or the entire drill bit) with water. Some argue that this procedure will preserve the drill and lead to better work without breakage. But as production researchers found out, cooling the drill does not affect its operation in any way.

Also, a Pobedit drill can be sharpened quite easily, but this must be done carefully - there is a risk of overheating the drill and breaking off part of it. This should be done when the drill becomes dull.