Recipe for masturbation: what were the first vibrators?

• 1 The principle of operation of the vibrator
• 2 Homemade vibrator
• 3 Vibrator based on a drill
• 4 Vibrator based on a hammer drill
• 5 General recommendations for use
• 6 Conclusion

During construction and various installation works, great importance is given to the arrangement of the basement of the future building. The main component of the foundation is the concrete mixture. This building material is known for its ability to cope well with long-term loads on it. Thanks to this characteristic, houses built with concrete mortar can last at least a hundred years. Concrete in its liquid state is highly dense, which is why it is so important to mix the mortar in a high-quality manner. After all, if you are negligent in kneading, air bubbles will remain inside the solution, and this can lead to a deterioration in its merits. It is precisely because of this property of the mixture that it is recommended to use a concrete vibrator on construction sites. Its use allows you to obtain the most homogeneous and thoroughly mixed product.

The modern market for construction tools and materials provides a large selection of vibrators. But the cost of the tool can scare away those who want to purchase it, so it is much more profitable and interesting to make a concrete vibrator with your own hands. Initially, it may seem that this process is very complicated and impossible, but if there is a scheme and a little time, anyone can do it.

Vibrator operating principle

The mechanism of operation of a vibrator for concrete.
Before you start making a vibrator on your own, it’s worth studying a little about the principle of its operation. The main purpose of this device is to eliminate air cavities and moisture from the concrete solution using a special movement of its nozzle, which is lowered into the cement. Due to the use of this equipment, the solution becomes more plastic and viscous, and the concrete solution is carefully placed into the desired shape without the formation of air cavities. In addition, everything is done as efficiently as possible. The use of this equipment has a positive effect on the performance of all construction processes as a whole. If you refuse to use it, the work will take much more time. The finished structure is stronger and more durable and has many other advantages.

Return to contents

Homemade sex toys: DIY pleasure (18+)

Why is it normal to compare store-bought shower gel and homemade one, but taking on the challenge of creating your own sex toys is weird? We decided to restore justice. True, putting a condom on a banana and going all out with the fruit, which, it turns out, can not only be eaten at night - this is uncreative, and we will not count this as a successful experiment.

More than eight million times, humanity has watched videos on how to make a vagina, anus or even a mouth for home pleasures. Dr. Lindsey Do (American clinical sexologist, sex educator and host of the Youtube channel Sexplanations) clearly demonstrates eight ways to make holes from a roll of toilet paper, a rubber glove (or condom), lubricant and a pair of rubber bands or a glass, dish sponges and the same rubber glove with lubricant. It's no surprise that this video became the most popular on the channel.

Now an option for girls: let's start with the simplest possible - a cooling dildo with a rejuvenating cryo effect. The instructions are even simpler than in the previous male version. Take a condom, pour water into it and hang it in the freezer. Just hang it, because if you put it down, one of the sides will deform and become flat. But what to do with it is up to you. It’s quite difficult to use it as a dildo, it’s still too cold, but moving the icicle across erogenous zones is easy.

If all your childhood you dreamed of becoming a sculptor, and while chatting on the phone you draw busts of David and Venus on pieces of paper and perfectly sculpt dough baskets, then making a penis out of wax will be a pleasant challenge for you. Take several large candles, melt them completely into a bowl, and when the wax has cooled a little, you can mold it into whatever you want. By the way, the figurine will turn out more realistic if you use your imagination and strain your memory - draw wreaths on it and make a relief on the head. Sit down, five.

A little more sex science from the Sexplanations Youtube channel, but for the fair sex. Tricks with towels are used again (put a marker inside, wrap it tightly, tie the top with tape tightly, make a head of cotton wool, and put a condom on top), a wooden kitchen spatula along with sponges for washing dishes, and even a comb in the company of a hot pot. True, this video received only a little more than half a million views, unlike the version for men.

A more complicated option for those already prepared is to make a real vibrator. Disassembling and reassembling a tape recorder in the garage is not only the lot of boys; after such an experiment, they will definitely accept you as one of their own, because you will create with your hands practically a new life - an entire machine that can turn on and off at your command. Scratch the bottom of the barrel and find: a tube of effervescent aspirin or vitamins, a plastic Kinder Surprise egg, a couple of wires, batteries, a glue stick - and a lot of patience. Watch the video, but then don’t ask: was it worth the trouble?

A small bonus for the most patient, curious and hungry - a recipe for edible panties! As children, we all wore edible watches made of candy, and as adults we switched to panties, but that didn’t make the candy any tastier. So we show you how to do something sweeter.

You will need:

• 200 ml freshly squeezed orange juice
• 200 ml water
• 10 tablespoons lemon juice
• 4 glasses of sugar (not an option for depraved healthy lifestyle lovers)
• 2 tablespoons grated orange zest
• 2 tablespoons grated lemon zest
• 40 grams of gelatin

This is interesting: Will Three Levels of Power

Cooking method

• Take a piece of cardboard as a stencil, trace your most elegant panties over it - separately the front, back and insert. Carefully cut it all out of cardboard.
• Pour orange juice over the gelatin and leave for a while.
• Pour the sugar with water, add the zest and bring to a boil, and then keep it on low heat for about 3 minutes, stirring constantly.
• Remove from heat and add the juice and gelatin mixture, stir well and strain to separate the zest.
• Place the stencil on a baking sheet, pour the mixture onto it, and next to it make several snakes of gelatin and put it all in the refrigerator for seven hours.
• Pour sugar onto a sheet of paper, place gelatin parts on it, make holes in the places where the seams are supposed to be, and fasten the parts together with gelatin “snakes”.
• Put on ready-made panties before use to prevent them from melting.

And in the video there is an option with chewing candies.

Homemade vibrator

A large number of modern factories produce professional vibrators for concrete. For many, it will seem easier to buy ready-made equipment. However, construction is not a cheap pleasure anyway, so why spend money on something you can do yourself? This does not require specific knowledge or skills. The entire manufacturing process does not take much time and is not at all complicated.

Many consumers have tools such as a hammer drill and a drill. They can be used as a rotating component. The main point in making equipment yourself is to assemble a tool that will transform rotational operations into oscillatory ones. Accordingly, it turns out that the task of making a vibrator from a rotary hammer or drill is quite feasible. For this reason, we will consider further how to complete this task.

Return to contents

When is it necessary to replace a dildo?

How and with what to replace a vibrator at home immediately after the desire arises?

There are many reasons why you will have to remember manual labor and engage in self-satisfaction with improvised means:

• embarrassment before going to a sex shop - what if family members find out about such weakness;
• there is no way to spend money on a toy right now;
• the desire appeared spontaneously, and the partner will not be home soon;
• The dildo I had already purchased had disappeared somewhere.

In addition, a man can give such a piquant gift to a woman if he himself is going on a long business trip. Such a gift will be a lifesaver for those who don’t know what to replace a vibrator with.

What comes to mind

The first thing women try to get vaginal pleasure are tubes of various cosmetics, which in shape and size resemble a male unit. However, when operating such objects, there is no vibration effect. This can not only “spoil” the sensations, but also completely nullify them.

Such improvised means often include ordinary candles. To achieve the desired shape, they are ground and polished. However, to start using a candle, you will need to spend some time doing non-stimulating activities. Such means are not suitable when you want to know how to replace a clitoral vibrator for “external” pleasures.

The means at hand that have the property of vibrating will help you get truly scorching pleasure. It is vibration that underlies the female orgasm. This is how the vaginal muscles contract when a woman is at the peak of pleasure. Items that can satisfy this request do not need to be prepared or purchased in advance. So, what can you replace a vibrator with at home?

Selecting a suitable replacement

If replacing a vibrator is a one-time measure, you can use a lot of available tools that can satisfy a woman’s desire.

Without even straining your imagination, you can build a satisfaction tool with your own hands:

1. Toothbrush with a rotating head. The effect of its use will be maximum only if optimal efforts are made. Do not overdo it and try to immediately start using the tool for other purposes. First you need to slightly excite yourself with your fingers.
3. Shower. Using a shower tap for self-satisfaction is a fairly popular and effective technique. A strong stream of water perfectly massages the clitoris. The woman experiences pleasure almost from the very beginning of masturbation. In addition, the temperature and water pressure can always be changed.
4. Mobile phone. One proven method is a mobile phone placed in a condom. Standard for all models and interesting in intimate terms is the vibration alert function. If you call from another phone and leave the device turned on in the vagina, you can experience sensations similar to the operation of a vibrator. However, to do this, you need to choose a phone of the “right” size. This is about the question of what can replace a deep vibrator.
5. Vacuum cleaner. Using different attachments, you can experiment with this technique. By sucking the clitoris in this way, you can get unforgettable pleasure.
6. A massager with a vibrating effect helps. The use of such a tool is quite suitable for self-gratification purposes. Performing a vibrating function, the massager is able to arouse a woman well. When thinking about how to replace a vibrator for the clitoris, you can safely turn to this option.
7. You can use a deodorant that has a rotating head - a ball. A used and washed bottle can be used for this purpose. In this case, you can squat or wriggle smoothly, bending and unbending. In the process you can get interesting sensations.

Using these available means, a woman can get quite strong pleasure. Such methods of self-satisfaction help to get rid of sexual tension, restore psychological balance and “put your thoughts in order.” Now, knowing how you can quickly replace a vibrator at home, you can start experimenting.

If a man is on a long business trip, he should go to the bathroom and see what kind of razor he uses. A device with vibration is ideal. All you have to do is remove the head with the blades and start massaging the intimate area. It is important not to forget about the condom.

When you have time for creative experiments, you can make a dildo from a wax candle. It needs to be heated and then allowed to cool slightly (without waiting for it to harden). Now is the time to use your imagination and creativity.

Common Mistakes

Trying to quickly get maximum pleasure, many girls strive to use objects that are shaped like the male genital organ. These include fruits and vegetables.

This is interesting: Who is Galina Yudashkina’s husband?

However, often such self-gratification objects are short-lived, too hard or soft, not large enough, or have the “wrong” shape.

When thinking about how to replace a vibrator at home, many women first think about food. Traditional bananas and cucumbers are not recommended. In this case, you can get irritation of the mucous membrane (if you do not use a condom), but the pleasure you get is very relative.

Do you need a man?

In search of comfortable self-satisfaction, women often forget that using improvised means allows them to experience only a small range of sexual sensations. Some even wonder if a vibrator can replace a man. Such sentiments do not at all contribute to the emergence of sexual “autonomy”.

However, variety in sexual life can be achieved with the help of many objects. For example, for the clitoris, you can use a dozen improvised means, and all of them will effectively cope with the task. The main rule is that before any actions that are performed with the vagina, all things used must be thoroughly washed. This will avoid unpleasant irritation or infection of the mucous membrane.

Knowing that she can quickly and effectively replace a vibrator, any woman is able to discover new facets of pleasure without leaving home.

When using homemade devices or household items, it is worth remembering careful hygiene. This will avoid possible irritation of the delicate area.

Drill based vibrator

Vibrator based on a drill.
A do-it-yourself concrete vibrator based on a drill is performed in several stages. To start making a homemade vibrator, you need to prepare a certain set of tools and materials:

• drill;
• welding machine;
• special drill for metal work;
• hacksaw;
• steel pipe;
• rectangular rod;
• bearings;
• rubber or plastic tube;
• casing to protect the nozzle;
• sleeve;
• speedometer cable.

As a driving mechanism for the device, you can use any drill, which almost every man has.

Initially, it is worth preparing a steel pipe, the length of which will be about 50 centimeters. This pipe will be used as a nozzle. Due to the fact that concrete solution is very aggressive in terms of its impact on various materials, it is worth using only stainless steel for the pipe.

To create the inner part of the vibrator, it is recommended to take a fairly strong rectangular rod, it is important that its diameter is about 1.5 centimeters. This rod will receive rotational action from the drill. You will also need to weld a small steel pipe to the rod. Due to this design, everything will move in the transverse direction. This movement will create a vibration effect.

When the internal part is finished, it must be secured inside the steel pipe. Fastening is carried out using bearings; it is important that this part can move freely. Due to the fact that a large load will be placed on the bearings, it is recommended to purchase high quality material. At the end of the rod you need to make a hole using a drill. The wire will be fixed to this hole. It is necessary to protect the bearings as reliably as possible from various dirt getting inside the device. The level of protection will determine how long you can use the vibrator.

The further process involves making a small cut of the tube. This rod will act as the nose of the equipment for working with concrete. Next, a high-quality bushing is selected, which is attached to one of the ends of the vibrator. Such a sleeve is necessary to isolate the rotating part of the device.

Tube for eccentric shaft.

The next step is to make an eccentric shaft from a rubber tube. It is important that the tube can be positioned freely. This shaft is responsible for connecting the drill to the nozzle. Which contributes to the creation of vibration movement. If you find it very difficult to make this shaft, you can replace it with a speedometer cable.

A tube is installed on the shaft or speedometer cable, but it is important that the length of the free ends is 4.5 centimeters. During the movement of the rod, vibration is created, and due to this, concrete vibrators can work. At one end, the rod is installed on the sleeve, and at the other end it is installed in the core with a hole. Their connection occurs. After this operation, a sleeve is installed to protect the joint.

The last step is to put the hose on the sleeve, which is fixed with a clamp, and the nozzle is protected by a special casing. At this point, the manufacturing process of the equipment is completed, you can begin to use it. A finished home-made structure can only be used after all installation work has been completed and only for its intended purpose.

Return to contents

Operating principle of internal vibrator for concrete

The most common submersible vibrators of the electromechanical type include an electric motor, a flexible hose (drive mechanism) and a working tip (mace or bayonet) that emits vibration. A powerful electric motor (1 kW or more) has one or three-phase power supply from an alternating current network. Using a flexible shaft, the length of which can be from 1 to 7 m, the rotation of the rotor is transmitted to the vibrating tip.

The vibrating nozzle is a stainless steel tube for resistance to corrosion from aggressive concrete mortar. To protect against moisture, the ends of the drive hose are sealed with rubber gaskets, and the nozzle has a polymer sheath. Inside the nozzle, a massive eccentric steel shaft rotates on a bearing. The discrepancy between the center of gravity of the shaft relative to the axis of rotation leads to the appearance of vibration oscillations of the nozzle, the frequency of which depends on the rotation speed of the electric motor rotor.

The shape of the working part of the vibrating attachment can be cylindrical (mace) or conical (bayonet). The first is intended for compacting concrete in forms and formworks with normal reinforcement frequency. The second type of nozzle is used for dense reinforcing mesh of poured forms. The vibrator kit may include several vibration attachments and clubs of different diameters. The weight of the motor and the length of the flexible drive must be such that one person can handle the tool. If the length of the shaft is more than one and a half meters, then two people must operate the device.

Video: Portable concrete vibrator

Vibrator based on a hammer drill

After the vibrator circuit for functioning in concrete has been prepared, you can begin installing the equipment based on the hammer drill. To construct this device, you will need some tools and materials:

• a hammer drill with a minimum power of about 2 kW;
• steel washer;
• peak.

An in-depth tool for mixing concrete mortar is installed in several stages. The most important thing is to use a hammer drill with a power of at least 2 kW. The use of the tool will be performed in a percussion system and this is worth learning during the preparation process.

It is advisable to use a lance as a nozzle for the equipment. It is necessary to construct some kind of base for the peak during operation. To accomplish this task, you can install formwork. You can create the required adhesion between these two elements by using a steel washer.

Equipment for mixing concrete mortar created independently, under conditions of a small volume of the mixture, can be made using bayonet technology. This technology requires mounting one nozzle onto an existing nozzle.

Diagram of a deep vibrator with a flexible shaft.

For this technology, it is important that the length of the entire nozzle bayonet of the equipment corresponds to the depth of the container. The nozzle will need to rest against the bottom of the container and change its position from time to time. The advantage of this technology is that it is possible to mix a large amount of concrete mixture in a short period of time.

The methods described above make it possible to create deep-depth equipment with the lowest financial costs. It is important to take into account that all the components and components used during the creation of the tool can be changed to different analogues. Replacements will be no less functional. In order for the replacement to be equivalent, it is important to study the principles of operation of the equipment.

Return to contents

How can you replace a vibrator at home?

Today, many women have a vibrator, but this is not an indicator of loneliness or the degree of luck in choosing a partner. On the contrary, often the presence of such a tool indicates that a woman loves sex, she is liberated and strives for new sensations. In fact, a female vibrator is not a substitute for a man, but a device that allows you to get completely new sensations. To understand what can replace a vibrator, it’s worth considering several common options.

When sexual desire increases, but there is no intimate toy at hand, you urgently want to replace it with something else. However, in order not to waste all the “fuse” in vain, you should approach the choice of the subject of self-satisfaction correctly.

General recommendations for use

• If you need to mix a large volume of concrete solution, for example, to install a monolithic base, you can use a vibrator based on a hammer drill. Nevertheless, it is important initially for such purposes to create a metal frame to secure the hammer drill, and also to mount a special steel platform.
• To install a vibrating tool, you must remember that its length should not exceed 100 centimeters. You also need to know that all connections must be designed especially carefully, because they will be subject to heavy loads and vibrations.

Return to contents

Rules for making a massager yourself

If you follow all the recommendations, then making a massager is not difficult.

To do this, it is worth taking into account certain parameters to ensure that the massage is safe and comfortable:

• diameter;
• work area size;
• form;
• material used.

It is recommended to select a device length that does not exceed 10 cm. Although in some cases it is necessary to increase this parameter.

You should not make the diameter larger than 5 cm. If this figure exceeds the norm, then it will be difficult to insert the device into the anus. In addition, this procedure will cause pain.

To make the correct form, it is recommended to familiarize yourself with pharmaceutical equipment. For this, gypsum, clay or other mixtures are used that are molded. Some people use plasticine. But you should understand that such a design may not be reliable. To prevent it from falling apart, it is better to use domestic material.

Once the appropriate material has been selected, you can begin the actual manufacturing procedure of the device. It is molded, for this you can be creative. It can only be used when it is completely dry.

Making a massager is not difficult. The difficulty is manifested in the selection of the necessary parameters. Therefore, it is worth following all the above rules so that the treatment brings the desired effect.

Some men do not agree to have such a device interfere with their body. In this case, they can use a contactless massager. One of the effective devices is the “Straw Bull”. This device is a tube that expands on one side. With the help of this design, blood circulation in the pelvic organs is improved.

Conclusion

In order to fill a monolithic base or process a large volume of solution, it is recommended to use flat equipment. In order to be able to perform such work, it is important to have a high-power hammer drill, as well as a steel frame on which it will be mounted. We must not forget about preparing a special platform made of stainless metal.

A vibrator made by yourself, of course, cannot be used during large construction projects, but in private or personal use it is quite possible. The financial savings are absolutely obvious.

DIY dildo: making a sex vibrator at home

What to do when you often have a crazy desire to have sex, but your partner is not nearby (or there is no beloved man at all)? A dildo will help satisfy the desire for sexual intimacy. It is advisable to have a vibrator or dildo at home for such purposes. Is it necessary to buy sex toys for sex shops? Of course not. You can make a vibrator for sex with your own hands.

All you need is ingenuity and available means. There are a lot of ideas on how to make a dildo at home. Why not use them?! Moreover, the experience of those with skillful hands has already confirmed an important fact: a home vibrator is no worse than a store-bought one.

Robot stages

How to make a dildo at home? Required:

• flexible transparent plastic;
• adhesive tape (scotch tape);
• selected material;
• cling film.

A square or rectangle is cut out of a sheet of plastic, depending on the size of the product planned. The length of the sheet is adjustable at will - the more centimeters a man wants to add to himself, the longer it is. The width of the sheet depends on the existing parameters of the penis: in an erect state, it should easily pass inside and have free space. To make a homemade penis fit in size, you should:

• measure it with a measuring tape;
• add the required number of centimeters to the results obtained;
• cut to the desired width.

When the dimensions and cutting are finished, the sheet is rolled into a tube, and the joint of the edges is tightly fixed with tape. A circle is cut out of plastic, which covers one of the holes and is also tightly wrapped with tape. The goal is to make the resulting tube completely sealed.

The second step in the “how to make a dildo” process is pouring. To do this, the erect penis is tightly wrapped in cling film so as to prevent the mass from coming into contact with the body. If the task is to make a smooth nozzle, you need to wrap it carefully, eliminating all possible irregularities, because The smoothness of the inside of the future nozzle will depend on this.

Next, the molding mass is poured into the prepared tube and the penis is lowered into it. The hardening process lasts on average 15 minutes, after which the structure is removed from the genital organ. Now you can carefully remove the tape and free the product from the plastic frame - the homemade phallus is ready for use.

If a guy wants to give the toy an anatomical shape, this can be done using a knife and abrasive materials. They can also easily be used to make various protrusions, ribs, antennae and other “features” of attachments.