This formwork is used for the construction of foundations and walls. The kit includes a minimal selection of necessary elements with a long turnover period. Each piece that makes up Peri formwork can be used both vertically and horizontally.
Description of company products
The German manufacturing company Peri entered the construction market in 1969. At first, the range of products offered was small; the company offered customers beams for formwork.
Over time, the company began to produce various products for construction work. Peri formwork is a universal kit that can be used for the construction of a wide variety of structures and buildings, no matter how complex the project.
The formwork used in monolithic construction is an easy-to-use technological equipment. The equipment is easy to move and install; it can be used in both private and professional construction.
Formwork of floors, columns and other objects
If you want to purchase or rent Peri formwork for concreting horizontal surfaces, you will probably be offered the Multiflex system. The basis here is the GT 24 and VT 20K beams. With the help of such Perry formwork it is convenient to fill floors of complex configurations and spans. The design allows for the ability to work in confined spaces.
The price of Peri formwork includes the cost of slab racks. Especially for the Russian market, the company offers the MR B 370 model. Such racks can withstand loads of up to 24 kN. This allows you to reduce the rental price of Peri formwork per m2, since you can get by with fewer support elements. The products are easy to assemble and can be used in almost any system. In addition to Multiflex, the Peri formwork catalog offers the following models for concreting floors and ceilings:
- Scydeck;
- Skytable
- Variodeck
- Table module VT.
The description of Peri Quattro formwork can be summed up in one phrase - the optimal solution for the construction of columns up to 4.5 m high. Using the system, both rectangular and round objects can be concreted. The assembled module moves easily on wheels. The sheathing can be additionally secured inside to achieve high quality concrete surfaces. Other options offered by the Peri formwork catalog: Lico, Rapid, SRS. The wall-mounted models Trio and Vario GT 24 can also be used for this task.
A review of what peri-type formwork is would be incomplete without mentioning special-purpose systems. The self-climbing cantilever-adjustable structure ACS is used when pouring staircases and elevator shafts, inclined pylons, and high-rise cores. Hydraulic mechanisms demonstrate absolute reliability in all weather conditions. For particularly complex projects, you can also use models such as LPS, RCS and SCS. For unique objects, the manufacturer can develop exclusive boxes based on a 3D model. Our company offers everyone who wants to buy Peri formwork in Moscow at affordable prices. In addition to fully equipped systems, you can also purchase individual equipment elements.
Advantages of formwork
What is the advantage of using formworks produced by Peri? The most significant advantages:
- Versatility. The use of Peri kits allows you to build buildings of any type, while the same kit can be used to construct walls, ceilings and columns.
- Ease of use on construction sites. The elements are light in weight, they fit together easily and are also easy to disassemble.
- Economical. The use of formwork allows you to reduce the cost of transportation and unloading and loading operations due to the fact that the number of elements is small.
- Accuracy. The precisely maintained geometry of the elements allows you to assemble forms without adjustment. In this case, the joints between the elements are sealed, which eliminates leakage of concrete mortar.
About Peri
The Peri company has existed since 1969 - in the German city of Weissenhorn it was founded by the spouses Arthur and Christl Schwerer, and at first the company produced other products for monolithic construction - I-beams. Two years after the founding of the representative office, the company began to open in other cities in Germany. In 1974, the company entered the international market - first its branches opened in Switzerland and France, and then in the USA. In the mid-1980s, the company developed and began producing a new product - the TRIO universal formwork system. Just a few years after its introduction, TRIO formwork became the most popular on construction sites around the world. A little later, the Peri brand became the author of a new development - the ACS self-climbing formwork system, which does not require the use of a crane, and in 1992 the original MULTIPROP load-bearing posts and the innovative aluminum SKYDECK system for floors were developed.
Peri formwork has been used in the construction of many objects, including world-famous ones, for example, the ship elevator at the shipyard in Luneburg (Germany), the Millau viaduct (France) - the highest cable-stayed bridge in the world. It was also used in the construction of the Turning Torso - a “spiral” skyscraper in Malmö (Sweden), the Mercedes Benz Museum in Stuttgart (Germany), and the Sheikh Khalifa Bridge in Abu Dhabi (UAE). The company also provided its products for the reconstruction of the Panama Canal in 2011.
Types of formwork
The range of formwork systems from Peri is rich and varied. Here are brief descriptions of the most popular kits:
- This is a lightweight frame-panel type formwork. Suitable for the construction of a variety of objects, from private houses to large industrial premises.
Advice! The installation of DOMINO formworks requires the use of a construction crane. If using a faucet is not possible, the DOMINO Alu kit should be used.
- A universal system formwork that can be used for casting vertical and horizontal parts, as well as for constructing columns.
- Lightweight formwork for columns, it is very easy to assemble and disassemble without the use of tools, only due to the built-in locks.
- This is a system for creating monolithic floors. The basis of the kit are beams that can be installed on racks with a given pitch. The kit is suitable for pouring large-area floors.
- This is a specially designed system for the construction of round walls. Features simple and quick assembly. It can be used not only for the construction of houses, but also for the construction of sewage treatment plants, silos, etc.
So, Peri formwork systems are convenient and profitable. The company's assortment includes a variety of kits, using which you can erect buildings according to the most complex projects. The company has many representative offices in different cities, so you can purchase the necessary equipment in any part of the country.
Kinds
Peri's range of formwork structures is diverse. Frame-panel formwork sets are suitable for the construction of low-rise buildings and industrial buildings.
For walls
Those wishing to purchase Peri formwork for building walls are advised to pay attention to the Domino kit. The design is lightweight, consists of formwork panels and frames, is used for pouring walls, and is also suitable for interior work.
Each element of the Peri formwork has a reliable anchor-type connection; the surfaces are leveled using proprietary DRS locking devices. Some versions are mounted manually and no lifting equipment is used.
The Maximo formwork system is popular among builders. The main advantage is that the structure is quickly installed and disassembled. By purchasing this formwork kit, you get the opportunity to save up to fifty percent of the time required to install and dismantle the entire formwork structure.
All work processes are performed on one side, and this feature greatly simplifies the assembly process.
The elements of the Peri Maximo set are aligned using the BFD lock.
Peri Trio formwork shows excellent quality when concreting walls. All panels are connected with a DW anchor system and a BFD locking device. Another important advantage is that this formwork structure is perfectly compatible with the Maximo kit due to the fact that many components are interchangeable.
The Peri Trio formwork kit is recognized as the most practical option.
In addition to the models discussed, the manufacturer is ready to offer you Rundflex and Vario GT 24 formworks.
Universal
Filling vertical surfaces with concrete is possible using the Peri universal formwork kit, which costs no more than narrow-profile systems, but can be used much more widely.
An example of such a design is the DUO kit. Having purchased such formwork, you can use it to solve any standard tasks - pouring foundations, building walls, arranging ceilings and columns.
The system elements are made of Polytech composite material, which is lightweight and particularly durable. Installing the entire formwork structure will not require much time and labor; even an inexperienced builder can cope with this task. In exceptional cases, it may be necessary to use a lifting mechanism.
For floors
Is there a need to concrete horizontal surfaces? You can purchase or rent the Peri Multiflex formwork set. The basis of this set is VT 20K and GT-24 beams. This Peri formwork system will help you conveniently fill spans and floors of the most complex configurations. The design is created in such a way that it can be used without problems in confined spaces. The total cost of formwork also includes the price of racks for supporting panels intended for pouring floors.
There is a special offer for the Russian construction markets - the product MR B 370. These are racks that are distinguished by their ability to withstand loads reaching 24 kN. This feature creates the opportunity to reduce the rental cost of one square meter of formwork kit, because a large number of racks are not required as elements supporting the deck.
The kits are quick to assemble and can be used in almost any system.
In addition to the Multiflex set, Peri's catalog collection of formwork structures for pouring floors and ceilings presents several more models - Scydeck, Skytable, Variodeck and Table module VT.
For columns
The best option for arranging such elements is the Peri Quattro formwork set, with which you can fill columns reaching a height of four and a half meters. It should be noted that such a system allows pouring concrete into columns of not only rectangular, but also round shapes.
The entire module, prepared for operation, moves using special wheels. Inside it, it is possible to attach a special cladding material, which makes it possible to achieve high-quality filling. There are several more options for Peri formwork designed for pouring columns:
- Lico set;
- Rapid kit;
- SRS formwork.
For similar purposes, structures for arranging walls - Trio and Vario ZhT 24 - can be used.
Special purpose
To complete the review of Peri formwork systems, mention should be made of special-purpose kits. The self-lifting cantilever structure ACS of the adjustable type is used for the construction of staircases and elevator shafts, inclined pylons, and cores of high-rise buildings.
Hydraulic mechanics guarantee complete reliability in all weather conditions. The implementation of the most complex design solutions is possible using LPS, RCS or SCS formwork systems. For the construction of unique structures, the manufacturer develops exclusive versions of boxes based on 3D models.
In addition to complete sets, individual elements are also purchased.
