The price in the estimate for mesh reinforcement is often part of the scope of work, the price in the estimate for concrete reinforcement or another.

06-01-015-10

06-01-015-10

2000

( ),
2009
. , .

, 2014 1

: 6084,69 .

06-01-015-10

, . -2001 2009
2000
.
, .
, – DefSmeta

, .

Restoration of concrete canal walls after repair work

FEDERAL UNIT PRICE FERR 66-05-01

The price takes into account the work requirements for 2000

(Moscow prices), calculated according to the GESN model of
2009
. Indexation of translation into current prices must be applied to the cost.

You can go to the pricing page, which is calculated based on the 2014 edition standards with additions 1

TOTAL PRICE: RUB 1,028.11.

Look at this standard in the 2022 edition open page

Look at the resource part of the price in the GESNr standard 66-05-01

When used in an estimate, the price requires indexation to translate into current prices. The price is based on the GESN-2001 standards, as amended in 2009.

in
2000
.

Source

Mesh reinforcement. Price in estimate.

Before choosing a price in the estimate for reinforcement, it is important to study the technological and design data and requirements necessary for the correct and safe construction of a particular facility. During the construction of a facility, when carrying out concrete work and erecting structures made of concrete, brick, stone and many other materials, there is often a need to reinforce the structures being built. Reinforcement is performed with the aim of strengthening the structure in relation to destructive external factors such as temperature changes, soil shrinkage, changes in humidity and many others.

Reinforcement of wall, floor, and ceiling structures can be made from various materials, for example, reinforcing steel, anchors, and mesh. The choice of material for reinforcement directly depends on what the reinforced structure is made of and what loads it will bear during operation. All this data must be indicated in the design documentation of the construction project, with an exact indication of the brands, manufacturers, volume and other indicators of all materials for this type of work.

One of the most commonly used materials for reinforcement is reinforcing mesh. Meshes are made from different materials, each of which has its own advantages and disadvantages. Thus, metal reinforcing mesh is the most durable and stable, especially if you need to strengthen and secure load-bearing monolithic structures. However, the metal mesh is susceptible to corrosion over time, and the lack of flexibility and ductility can cause the destruction of the concrete structure itself. In this regard, in construction, meshes made of polymer and fiberglass materials, as well as fiberglass, are often used to reinforce structures. At the moment, there are many manufacturers of reinforcement mesh on the market, which differ not only in the material from which they are made, but also in the size of the cells, production method and other indicators.

Concrete reinforcement. Price in estimate.

Most often, the price in the estimate for concrete reinforcement is provided as part of the work for the construction of concrete structures. As can be seen in Figure 1, welding and installation of reinforcement in a reinforced concrete structure is a necessary condition for the correct execution of this type of work without violating building codes and safety regulations. Reinforcement is one of the most durable and resistant materials, and therefore it is used to strengthen and protect against destruction load-bearing monolithic structures, foundations, floors, ceilings, that is, structures whose operation is associated with heavy loads and unfavorable external conditions.

The reinforcement, as a rule, is supplied in 11.7 m rods, then cut directly on the construction site to the required lengths and laid in the concrete structure. Reinforcement comes in different classes and brands, the choice of which also depends on the design data and concrete parameters. Therefore, the use of prices in estimates for concrete reinforcement requires careful analysis.

Figure 1. Reinforcement as part of the work within the prices.

A similar method should be applied if a quote is needed in the estimate for reinforcement of concrete slabs. When applying a particular price in this case, it is also necessary to analyze and compile a lot of data, including the method of performing the work, the parameters of the materials used, etc. For example, the thickness of the reinforcement should be selected based on the thickness of the concrete; depending on the brand of concrete and additives in its composition, the price in the estimate for reinforcement, etc., should be selected. .

The essence of styling

The cement screed method allows you to obtain a solid base for the floor and improve the performance of hydro and thermal insulation in an apartment or facility. The price is calculated based on the parameters of the object, as well as the type of structure itself. An additional element of this method is the reinforcement process, which is partly performed on the basis of fiber, which creates additional costs. In this regard, when making a decision, the buyer is faced with the question of the total cost of this technology.

The concrete laying method is used in cases where specialists are dealing with an uneven surface. In this case, the filling will be done at an angle that allows it to be brought into the appropriate form; in addition, it allows you to mask some defects.

Taking into account the new method, such a base is perfect for new buildings with a “rough” finish; in addition, it has additional thermal insulation characteristics. In addition, the cement mixture will help distribute the load over the entire surface.

Dismantling

It is often included in the overall estimate for pouring concrete on the floor as a preparatory item. This is entirely acceptable if the contractor performs a full range of work. But sometimes it may be planned to first remove the old concrete floor and then move on to installing the new one. In addition, this may be a completely different covering, redevelopment of the building. In this case, the dismantling of the concrete floor is highlighted in a separate document, drawing up your own estimate for it

When dismantling the floor, the estimate must include the cost of renting equipment (if the contractor does not have it in the required quantity or type). The costs of paying workers and renting transport equipment for removing construction waste are also taken into account. When drawing up estimates for dismantling, price 46-04-009-01 is used.

There are no costs for materials at all, so this section is not taken into account in the estimate.

Advantages of screed reinforcement

Reinforcing mesh allows you to pour a thin layer of mortar, making it possible to significantly save on materials. With reinforcing mesh, high strength concrete is achieved, which becomes resistant to destructive influences. Reinforcement allows you to get a flat plane at all levels, including in apartments with multi-level floors.

Basic methods of reinforcement

Reinforcement methods differ depending on the use of material (reinforcement) used in the work:

• metal rod frame;
• metal mesh welded from individual elements;
• frame made of materials: polypropylene fibers, fiberglass rods;
• fiber fiber.

Reinforcement

Questions regarding the pricing of materials and work in construction and repairs

Reinforcement

Vlassoff Mon Jun 09, 2008 14:41

According to the price 06-01-015-10, when reinforcing, the weight of the reinforcement is taken into account. Question: how to calculate the weight of the reinforcement, having data on the reinforcement area? What principles are being prescribed? Those. What is taken into account when increasing the size of the reinforcement? Cell area, reinforcement weight, classification of the base itself?

The message was issued on the basis of paragraphs 15, 17, 18 and 19 of the Forum Rules

Vlassoff Active participant Messages: 386 Registered: Tue Oct 02, 2007 15:02 From: Tula, Russia Reputation: 1 (?)

• Website
• ICQ

ABK Mon Jun 09, 2008 14:50

This is design data only. It all depends on the load. The estimator has no right to carry out such calculations.

ABK Forum Elder Messages: 3232 Registered: Thu Aug 02, 2007 8:25 From: Orenburg region. Reputation: 71 (?)

• ICQ

Vlassoff Mon Jun 09, 2008 14:53

ABK wrote: This is only design data. It all depends on the load. The estimator has no right to carry out such calculations.

Hmm... What if you were forced? The loads are the same, as indicated in the topic

https://forum.smeta.ru/viewtopic.php?t=5501

That is, when installing a dirt protection system, a concrete base is made, which must be reinforced, and then tiles are placed on it, and then the coating itself is installed...

The message was issued on the basis of paragraphs 15, 17, 18 and 19 of the Forum Rules

Vlassoff Active participant Messages: 386 Registered: Tue Oct 02, 2007 15:02 From: Tula, Russia Reputation: 1 (?)

• Website
• ICQ

ABK Mon Jun 09, 2008 14:55

It's clear. But you don’t know whether only people will walk on this surface or whether various forklifts will also drive on it.

ABK Forum Elder Messages: 3232 Registered: Thu Aug 02, 2007 8:25 From: Orenburg region. Reputation: 71 (?)

• ICQ

Vlassoff Mon Jun 09, 2008 14:57

ABK wrote: I see. But you don’t know whether only people will walk on this surface or whether various forklifts will also drive on it.

A dirt-proof coating is a coating that is installed in front of the entrance to the office so that dirt from the shoes of an endless stream of shoes flies off onto the street. Read more:

https://grjazinet.h12.ru/manuf/emco/radial/

Therefore, the arrival of a loader on it is force majeure!!!

The message was issued on the basis of paragraphs 15, 17, 18 and 19 of the Forum Rules

Vlassoff Active participant Messages: 386 Registered: Tue Oct 02, 2007 15:02 From: Tula, Russia Reputation: 1 (?)

• Website
• ICQ

tulenin Mon Jun 09, 2008 15:06

Use the cheapest reinforced mesh (for example, 4mm with a cell of 100x100)

tulenin Dear consultant Messages: 1866 Registered: Tue Aug 29, 2006 20:39 From: Bashkortostan (Bashkiria) Reputation: 20 (?)

Vlassoff Mon Jun 09, 2008 15:10

tulenin wrote: Use the cheapest reinforced mesh (for example, 4mm with a cell of 100x100)

And on what basis do I include it? Or is there a specific price for the mesh? Why am I interested - when the reinforcement for the project was estimated, the number of kilograms was already given...

The message was issued on the basis of paragraphs 15, 17, 18 and 19 of the Forum Rules

Vlassoff Active participant Messages: 386 Registered: Tue Oct 02, 2007 15:02 From: Tula, Russia Reputation: 1 (?)

• Website
• ICQ

Julia. Mon Jun 09, 2008 15:52

Vlassoff wrote: And on what basis do I include it? Or is there a specific price for the mesh? Why am I interested - when the reinforcement for the project was estimated, the number of kilograms was already given...

06-01-015-10 with replacement of reinforcement with mesh

Julia. Dear consultant Messages: 1705 Registered: Wed Feb 28, 2007 12:58 From: Moscow region Reputation: 11 (?)

Vlassoff Mon Jun 09, 2008 15:59

Julia. wrote: 06-01-015-10 with the replacement of reinforcement with mesh

Hmm... in this price, the reinforcement is given in tons, so I need to calculate the tonnage, finding out the dimensions of the mesh cell and the number of kilograms per square meter...

The message was issued on the basis of paragraphs 15, 17, 18 and 19 of the Forum Rules

Vlassoff Active participant Messages: 386 Registered: Tue Oct 02, 2007 15:02 From: Tula, Russia Reputation: 1 (?)

• Website
• ICQ

Michel Mon Jun 09, 2008 16:09

yeaaah... that's a pretty good idea..

Mikhel Active participant Messages: 446 Registered: Tue May 29, 2007 8:45 From: St. Petersburg Reputation: 3 (?)

Julia. Mon Jun 09, 2008 16:11

GOST 8478-81 “Welded mesh for reinforced concrete structures”

Julia. Dear consultant Messages: 1705 Registered: Wed Feb 28, 2007 12:58 From: Moscow region Reputation: 11 (?)

Vlassoff Thu Jun 19, 2008 1:13

Julia. wrote: GOST 8478-81 “Welded mesh for reinforced concrete structures”

Here!!! Professionals, as always, at their best!!! Thank you!!!

The message was issued on the basis of paragraphs 15, 17, 18 and 19 of the Forum Rules

Vlassoff Active participant Messages: 386 Registered: Tue Oct 02, 2007 15:02 From: Tula, Russia Reputation: 1 (?)

• Website
• ICQ

Tanya Thu Jun 19, 2008 19:10

As far as I remember, the weight of the reinforcement is taken according to the range depending on the diameter and multiplied by the length of this reinforcement. Or did I misunderstand the question?

Tanyushka New Posts: 13 Registered: Mon Apr 21, 2008 15:28 From: Samara Reputation: 0 (?)

• ICQ

Return

Go to:

Who's at the conference now?

Currently browsing this forum: no registered users and guests: 1

Repair of concrete walls, price estimate

Sorted by relevance

| Sort by date

Author: Irina. Nadezhda, 1GESNs01-02-011-01Patch repair

cement concrete pavements
with concrete
, pothole depth: up to 50 mm,
repair
in one place up to 1 m2100 m2 Road worker 2nd category (wed 2) person-h73.34 Road worker.

Author: Nadezhda. Good afternoon. It is necessary to draw up an estimate with the type of work GESNs 01-02-011-02 “Pothole repair

cement coatings
with concrete
,” but I don’t have this reference book in my program. Please tell me what price can be applied from GESN?

Author: Alexey. Good afternoon! repair
of a concrete
floor: dismantling
concrete
, underlying (crushed stone), preparing
concrete
, installing
a concrete
floor.

How to correctly estimate the repair
of concrete
steps according to FERr (TERr) 59-5-02? The price does not specify the length of the steps being repaired, but we are repairing a porch in which the length of one .

. coefficients to HP - 0.9 and to SP = 0.85 for these prices? And why are repair works, by their nature, included in Collection No. 6? Answer Prices table. 06-02-001 “ Repair
of concrete
and reinforced concrete structures” (from the estimate engineer’s reference book “Estimate standards and prices for new technologies in construction.”

Additional work

Sometimes it is necessary to draw up an estimate not entirely for a concrete floor, but for a specific type of work. In this case, it is entirely acceptable to include all expected costs in the overall estimate. But it is also possible to highlight this as a separate document. This may be necessary if the contractor was ordered only for a certain type of work. Then it is sometimes advisable and convenient to calculate it separately. The main similar situations, when most often calculations are made in a separate estimate, usually include:

• Coloring. To paint the floor, the estimate includes the cost of purchasing paint, varnish if necessary, as well as related materials (rollers, brushes, paint containers). The work of workers is also taken into account (often calculated by floor area - the cost is initially indicated per 1 square meter in prices). Sometimes, painting large volumes may require additional equipment (for example, paint sprayers) - in this case, the material consumption is usually greater than when painting using the standard method. But workers' pay will be lower. Plus, the work gets done faster. The rental of such equipment is usually paid separately or included in the total cost of the contractor's services.
• Filling. Sometimes concrete is poured over an existing surface. For example, if the screed is already outdated, but there is no point in changing it, then you can simply pour concrete on top. In this case, the estimate includes the same costs as for standard work, but without surface preparation. In addition, significantly less material will also be required, since the layer will be quite thin.
• Reinforcement. Often, before pouring the floor, additional reinforcement is carried out - in this case, half of the concrete is first poured, then a frame is made from reinforcement and the rest of the mortar is poured on top. This allows you to strengthen the floor. This is especially important in old structures, where the entire object needs to be strengthened directly. This is also important for industrial premises with increased load. The estimate includes the cost of purchasing the fittings itself, renting welding equipment, and also a significant cost item is the payment of workers - they are the ones who do the main work to complete the task. It should also be taken into account that in this case, usually more solution is required than when pouring the floor with concrete.
• Repair. The concrete poured floor may be in quite normal condition, but there may be some cracks or potholes - in this case it does not need to be completely replaced, but only repaired to the coating. In this case, concrete is poured only in certain places. In this case, the main expense items will be payment to workers and the purchase of materials (still, not too many of them are needed). In some cases, if you need to first remove part of the concrete, then additional equipment will be needed. If the contractor does not have it, then the rent is indicated in the estimate.
• Padding. This is an integral part of pouring concrete for the floor. It is the primer that significantly strengthens the surface, increases the service life of the floor, and also prepares the coating for further finishing. The estimate usually includes only the purchase of the material itself and payment to the workers. Sometimes priming can be carried out using special equipment - in this case, costs can often even be reduced. It is impossible to specifically predict the cost here because the range for the primer is too large. The higher the quality, the more expensive it is. At the same time, if we are talking about production facilities, workshops, then there is no point in paying too much money - it is enough to choose a completely budget option.

General concepts

It should be said right away that usually the floor is poured with concrete, taking into account not only the wishes of the customer, but also the standards, especially when it comes to industrial premises or the initial commissioning of a residential building. For such areas, special regulations provide for certain requirements and standards: floor thickness, concrete characteristics, proportions when mixing the solution. If the technology is violated, the facility may not be accepted for operation at all, or serious problems will arise in the future for the person who approved the calculations. All estimated standards are indicated in TSN-2001.3-11 (Chapter 3 is devoted to construction work, namely collection 11 - to work in relation to the floor). The price here is taken from 11-01-011-09.

That is why the contractor must first familiarize himself with the object itself, and then make all the calculations in accordance with which particular group it belongs to. Next, you will need to explain to the customer that the increase in cost and the use of more material is not just a defect or an increase in the cost of the object, but a necessity. The amount of material that will need to be purchased will depend on how high the floor is poured.

Installation stages

Whatever material is used as reinforcement, the operating procedure is the same in each method. Stages of work:

• The surface is cleaned of debris and dirt, large defects and depressions are sealed with a solution, a base is prepared, which is primed before installing the screed;
• Stones, metal scraps, and tubes are laid out, on which the reinforcing mesh is laid at a height of 2-3 cm from the base. The meshes are laid overlapping and tied together with thin knitting wire.
• Islands are made of mortar where the beacons will be installed. The width between beacons is from 150 cm, but does not exceed 230 cm, one size is selected for installing beacon profiles;
• The reinforcing mesh is laid firmly, so you can move along it; if not, then islands are made for pouring mortar;
• The solution is poured; for large areas, the screed is laid in stages; after the cement mixture has set, the profiles are removed and the surface is leveled.

Reinforcement of masonry walls. Price in estimate.

By analogy with the reinforcement of concrete structures and floors, it is possible to reinforce masonry walls. It is noteworthy that reinforcement of walls is possible if the walls are made not only of concrete and concrete structures, but also of brick, stone, concrete and aerated concrete blocks. For example, as can be seen in Figure 2, the price in the estimate for the reinforcement of masonry walls is part of the scope of work even when laying the facing layer. In addition, the use of reinforcing mesh is often used for wall finishing work such as surface filling. These methods are used in the same way as when reinforcing other surfaces, in order to protect and strengthen the finish, and its long-term service.

Figure 2. Wall reinforcement in price

Thus, reinforcement is an important element in the construction of structural elements of buildings and structures. Therefore, the correct and correct application of prices for the reinforcement of structures directly affects the correctness of drawing up estimate forms and the cost of construction of the facility as a whole.

Floor reinforcement. Price in estimate.

When approaching the choice of prices in the estimate for floor reinforcement, just as when reinforcing any other structure, it is necessary to rely on sheets and diagrams of the project for the construction of a specific facility. When reinforcing the floor, reinforcing bars or reinforcing mesh are most often used. In cases where serious loads are expected during the operation of the floor, for example, the movement of technological transport, installation of heavy equipment, aggressive environmental conditions, etc., it would be advisable to use reinforcement or metal mesh to strengthen and strengthen the floor. If the loads are moderate, it is possible to lay plastic or fiberglass mesh and fiberglass when installing the floor screed.

It should also be noted that when installing a floor screed, the price in the estimate for reinforcing the floors with mesh is also usually part of the scope of work. It is necessary to clarify that reinforcement is not always a prerequisite for floor installation work. For example, in the case of the construction of private buildings, garages, verandas, etc., it is possible to exclude reinforcement from the scope of work. However, as noted above, reinforcement is a way to increase the service life of structures and protect them from destruction. Therefore, most often, the estimate and design still provide for reinforcement, especially in cases of construction of civil and industrial construction projects.

In addition, reinforcement is necessary when constructing multi-layer floors. If, before pouring the floor with concrete, it is necessary to carry out work on installing layers of waterproofing and thermal insulation, then in the case of direct application of the screed to these layers, instability of the entire structure may occur, and subsequently its destruction. Therefore, floor reinforcement will be a way to eliminate unpleasant consequences after the facility is put into operation.

Prices for work

The work can be carried out in different ways depending on the operations that need to be carried out on the original coating.

The following are prices for basic types of such work:

• Compaction of the mixture - from 350 rubles per m2;
• Installation of waterproofing (film) – 150 rubles per square meter;
• Using concrete technology - from 250 rubles per meter;
• A mesh that is attached to the finished base - from 370 rubles;
• Thickened concrete screed with reinforcement – ​​from 350 rubles;
• Two-layer reinforcement - from 800 rubles per meter.

In addition, as advice, experts recommend strictly following the technological processes in this matter, as well as using concrete mixers to create the mixture. It is better not to save on the cost of materials. Of course, in fact this is not the cheapest operating technology, but the quality of the floor covering will cover such costs.

This concludes our review today! Share interesting articles with friends on social networks.

Estimates for concrete work

Prices for estimate services by option:

1. Option: for 1 position in the task 49-230
   rubles.
2. Option: 0.2-2%
   of the cost based on the estimate.

Detailed explanations of the price of services are presented below.

We set a price for our services depending on the complexity of developing estimate documentation. The complexity is influenced by the quality, scope of the client’s task (input data) and the type of estimate document being compiled.

The worse the quality of the task, the more difficult it is for the estimator. The greater the number of construction resources, works and conditions of their use, the longer the work of the estimator takes. The more requirements the task places on the type of estimate document, the more difficult it is to draw it up.

Good initial data are detailed types of work. They indicate the names of the manufacturer and brand of construction resources used, and indicate volumes that, if necessary, can be converted into any other formats. The cost of services in this case is minimal.

Poor input data are those that can be understood in different ways, i.e. they are not specific and not detailed in terms of the types of work used, types of materials, volumes and technology of work. In this case, the cost of services is increased, since the task will have to be finalized together. Sometimes the labor intensity of rework is higher than making an estimate.

More details about the types of source data can be found in the article: Assignment for estimate documentation.

Requirements for the type of estimate documentation may additionally include the development of:

• documents - market analysis, resource statement,
• use of non-standard calculation methods,
• non-standard forms of documents, etc.

The price of our estimator’s services also depends on the number of items (type of work, material, etc.) in the source data. On average, the price of such a position ranges from 49 to 230 rubles. This difference in cost per 1 item is obtained, as indicated above, depending on the volume of such items, the quality of the source data and documentation requirements.

Sometimes the preliminary initial data is so uncertain that it is impossible to even approximately determine the number of lines, so the option of estimating the price of services as a percentage of the cost obtained in the estimate is used. On average, this is from 0.2% to 2% of the cost obtained in the estimates.

Of course, we offer significant discounts for large volumes of work. We have repeated experience in providing services at 49 rubles per position with a large number of them.

Please note:

The minimum order for any estimate document with us starts from 3990 rubles. A complete price list for all our services can be found on the Prices for Estimated Services page.